Leo Vince exhaust

Can i remove the O2 sensor and put a leo vince on 2009 silverwing 600.
Thank's.

Hi grizzly,

Yes you can, you will need one of these, it's an O2 sensor modual that plugs into your cable harness. https://cart.jetkit.com/p-830-o2-oxygen-sensor-eliminator.aspx

Just a thought, but by installing what DennidB suggests, it may make your scoot emissions illegal in your province. You might want to check first.

grizzly wrote:

Can i remove the O2 sensor and put a leo vince on 2009 silverwing 600.

A Leo Vince USA factory representative is monitoring this thread http://www.advrider.com/forums/showthread.php?t=329617 .

I posted a question if the Leo Vince exhaust has the ability to screw in the OEM O2 sensor. I checked the Leo Vince documentation, but they were not conclusive.

Me being a fairly young guy....... When was the last emissions test did you take your bike to? Lol... Here in Chicago we don't need to, and even if we did, it is called a test pipe. My "family car is an 04 wrx with a 4.5" bell down to three inch straight from the turbo and out the tail end.... passes every time. lol

Thank you all for the responce. DennisB thank' for the heads up but I don't see anything for the silver wing 600.Also thank's to honda_silver for looking up for me. It look like the have one for the swing 400 but none for the swing 600. I was wondering if the exhaust on the swing 400 is the same part number as the swing 600.

Regard's Andy.

In the USA you can pick up the LV exhaust from here:
http://www.scootertrap.com/SilverWing600.htm
Very reliable vendor. Owner owns a Silverwing.
Name is Matt. Good to deal with, very responsive to emails.
Will be happy to answer any questions for you.
Don't know if you have an LV vendor in Canada.

You can use the O2 sensor you have if you weld a bung into the header pipe that comes with the leo vince.

Here is a stainless bung (ex.) :

http://www.frsport.com/FRS-O2-Sensor-Stainless-Steel-Weld-on-Bung_p_10166.html

that way you can still use your O 2 sensor to help the A/F ratio .

Hope this helps.
MaxB ( who is running stock exhaust)

z

x

bigbird, Try this thread: http://silverwing.org/cgi-bin/topic_show.pl?tid=3547

It states:

"Some of the newer model Silverwings come with an O2 sensor.
If you want to add an aftermarket exhaust to your bike,
and the new exhaust doesn't have a hole for the 02 sensor,
You can use this to eliminate the sensor.

Dynojet part #76423008 (Thanks to BMac for the find)

https://cart.jetkit.com/p-830-o2-oxygen-sensor-eliminator.aspx Dan in Miami. The Custom King! See my bike here!
http://silverwing.org/cgi-bin/topic_show.pl?tid=458"

Now you need to talk with Dan.

Actually he needs to talk with Dynojet.
They will likely have proper installation instructions.
All I did in that board was organize what people brought to our attention.