Givi AF214 Windscreen Torque Advice Needed

How tight should the 6 screws securing the windscreen be?

For the original windscreen, Honda recommends 1nm. I have a torque wrench, but only goes down to 5nm.

Thanks

I wouldn't worry too much. Just tighten them down good but don't push down since the grommets might fall through the holes and into the fairing.

ehaughn wrote:

How tight should the 6 screws securing the windscreen be?

Firm but not ham fisted tight.

I used German torque on the expandable rubber bushings.

"GUTENTIGHT"
http://neologisms.rice.edu/index.php?a=term&d=1&t=7455